Allied Telesis AT-9000 Series - Link Layer Discovery Protocol (LLDP and LLDP-MED)

Appendix B: Management Software Default Settings
1500
Link Layer Discovery Protocol (LLDP and LLDP-MED)
The following table lists the default settings for LLDP and LLDP-MED.
LLDP an LLDP-MED Default
Status Disabled
Notification Interval 5 seconds
Transmit Interval 30 seconds
Holdtime Multiplier 4
Reinitialization Delay 2 seconds
Transmission Delay Timer 2 seconds
Non-strict MED TLV Order Check Disabled