Allied Telesis AT-9000 Series - Spanning Tree Protocols (STP, RSTP and MSTP); Spanning Tree Status; Spanning Tree Protocol; Rapid Spanning Tree Protocol

AT-9000 Switch Command Line User’s Guide
1513
Spanning Tree Protocols (STP, RSTP and MSTP)
This section provides the default settings for STP and RSTP.
Spanning Tree
Status
The following table describes the Spanning Tree Protocol default settings
for the switch.
Spanning Tree
Protocol
The following table describes the STP default settings.
Rapid Spanning
Tree Protocol
The following table describes the RSTP default settings.
Spanning Tree Setting Default
Spanning Tree Status Enabled
Active Protocol Version RSTP
STP Setting Default
Bridge Priority 32768
Bridge Hello Time 2
Bridge Forwarding 15
Bridge Max Age 20
Port Cost Automatic Update
Port Priority 128
RSTP Setting Default
Force Version RSTP
Bridge Priority 32768
Bridge Hello Time 2
Bridge Forwarding 15
Bridge Max Age 20
Edge Port Yes
Point-to-Point Auto Detect
Port Cost Automatic Update
Port Priority 128