Allied Telesis AT-9000 Series - Show Storm-Control; Figure 54: SHOW STORM-CONTROL Command; Table 17. SHOW STORM-CONTROL Command

AT-9000 Switch Command Line User’s Guide
233
SHOW STORM-CONTROL
Syntax
show storm-control [ port ]
Parameters
port
Specifies the port whose storm-control, threshold limit settings you
want to view. You can specify more than one port at a time. To
display all the ports, do not include this parameter.
Mode
Privileged Exec mode
Description
Use this command to display information about the threshold limit settings
on the ports. Figure 54 shows an example of the information when you
enter the following command:
awplus# show storm-control port1.0.15
Figure 54. SHOW STORM-CONTROL Command
See Table 17 for a description of the table headings.
Table 17. SHOW STORM-CONTROL Command
Column Description
Port Indicates the port number.
BcastLevel Indicates the maximum number of ingress broadcast
packets per second for the port. Broadcast packets
beyond this number are discarded.
McastLevel Indicates the maximum number of ingress multicast
packets per second for the port. Multicast packets
beyond this number are discarded.
Port BcastLevel Mcastlevel Dlflevel
Port1.0.15 30100 100