Allied Telesis AT-9000 Series - Displaying DHCP Address Pool Configuration; Displaying DHCP Server Statistics; Figure 74: SHOW IP DHCP POOL Command

Chapter 15: DHCP Server with Port-Based IP Assignment
334
Displaying DHCP
Address Pool
Configuration
Use the following command in Privileged Exec mode to display the
configuration details and system usage of all DHCP address pools
configured on the device:
awplus# show ip dhcp pool
Use the following command in Privileged Exec mode to display
configuration details for a specified DHCP pool:
awplus# show ip dhcp pool [<address-pool>]
The ADDRESS-POOL parameter is the name of a DHCP address pool.
The following is an example output of the SHOW IP DHCP POOL
command.
Figure 74. SHOW IP DHCP POOL Command
Displaying DHCP
Server Statistics
Use the following command in Privileged Exec mode to display statistics
related to the DHCP server:
awplus# show ip dhcp server statistics
The following is an example output of the SHOW IP DHCP SERVER
STATISTICS command.
Pool P1 :
Total: 8
Leased: 2
Utilization: 25.0 %
network: 192.168.1.0/24
address ranges:
addr: 192.168.1.10 to 192.168.1.18
Host addresses:
addr: 192.168.1.12 MAC addr: 1111.2222.3333
lease <days:hours:minutes:seconds> <1:0:0:0>
subnet mask: 255.255.255.0