Allied Telesis AT-9000 Series - Chapter 16: DHCP Server with Port-Based IP Assignment Commands

337
Chapter 16
DHCP Server with Port-Based IP
Assignment Commands
The DHCP Server with Port-Based IP Assignment commands are
summarized in Table 30.
Table 30. DHCP Server with Port-Based IP Assignment
Command Mode Description
“DEFAULT-ROUTER” on page 339 DHCP
Configuration
Adds a default router to the DHCP
pool.
“DHCP-OFFER IP” on page 340 Interface
Configuration
Enables DHCP service on a switch
port and defines the IP address that
will be offered on this port.
“DNS-SERVER” on page 341 DHCP
Configuration
Adds a DNS server to the DHCP pool.
“DOMAIN-NAME” on page 342 DHCP
Configuration
Adds a domain name to the DHCP
pool.
“IP DHCP POOL” on page 343 Global
Configuration
Creates or accesses a DHCP address
pool.
“LEASE” on page 344 DHCP
Configuration
Sets the lease expiration time for the
DHCP pool.
“LEASE INFINITE” on page 345 DHCP
Configuration
Sets the lease on a DHCP pool to
never expire.
“NETWORK” on page 346 DHCP
Configuration
Configures a network to which the
DHCP pool applies.
“NO DEFAULT-ROUTER” on
page 347
DHCP
Configuration
Removes either the specified default
router, or all default routers, from the
DHCP pool.
“NO DHCP-OFFER IP” on page 348 Interface
Configuration
Disables DHCP service for a switch
port, an IP address on a switch port,
or a range of IP addresses on a switch
port.
“NO DNS-SERVER” on page 350 DHCP
Configuration
Removes the specified DNS server or
all DNS servers, from the DHCP pool.