Allied Telesis AT-9000 Series - Show Ip Dhcp Binding; Figure 76: SHOW IP DHCP BINDING Command

AT-9000 Switch Command Line User’s Guide
361
SHOW IP DHCP BINDING
Syntax
show ip dhcp binding [<ip-address>|<address-pool>]
Parameters
ip-address
IPv4 address of a leased IP address, in dotted decimal notation.
address-pool
Name of a DHCP address pool.
Mode
Privileged Exec
Description
Use the SHOW IP DHCP BINDING command to display all leases for
every client in all DHCP pools.
Use the SHOW IP DHCP BINDING command with the IP-ADDRESS
parameter to display details for the leased IP address.
Use the SHOW IP DHCP BINDING command with the ADDRESS-POOL
parameter to display the leases from the DHCP pool.
Figure 76 is an example of the information.
Figure 76. SHOW IP DHCP BINDING Command
Pool P1 Network 172.16.2.0/24
Default gateway 172.16.2.1
DNS Server 172.16.2.5
DHCP Client Entries
Port IP Address ClientId Expiry
-----------------------------------------------------------------
Port1.0.1 172.16.2.100 0050.fc82.9ede 21 Sep 2015 19:02:58
Port1.0.2 172.16.2.101 000e.a6ae.7c14 Infinite
Port1.0.2 172.16.2.102 000e.a6ae.7c4c Infinite
Port1.0.3 172.16.2.103 000e.a69a.ac91 Infinite
Port1.0.3 172.16.2.104 00e0.189d.5e41 Infinite
Port1.0.4 172.16.2.150 00e0.2b04.5800 Infinite
Port1.0.5 172.16.2.167 4444.4400.35c3 21 Sep 2015 14:58:41