Chapter 18: SNTP Client Commands
378
NO CLOCK SUMMER-TIME
Syntax
no clock summer-time
Parameters
None
Mode
Global Configuration mode
Description
Use this command to disable Daylight Savings Time (DST) and activate
Standard Time (ST) on the SNTP client.
Confirmation Command
“SHOW NTP ASSOCIATIONS” on page 383
Examples
The following example disables Daylight Savings Time (DST) and
activates Standard Time (ST) on the SNTP client:
awplus> enable
awplus# configure terminal
awplus(config)# no clock summer-time
To Next Page
Loading...
