Allied Telesis AT-9000 Series - Page 393

AT-9000 Switch Command Line User’s Guide
393
This example deletes all of the dynamic addresses learned on port 20:
awplus> enable
awplus# clear mac address-table dynamic interface port1.0.20
This example deletes all of the static addresses added to ports 2 to 5:
awplus> enable
awplus# clear mac address-table static interface port1.0.2-
port1.0.5
This example deletes all of the dynamic addresses learned on the ports of
the VLAN with the VID 82:
awplus> enable
awplus# clear mac address-table dynamic vlan 82
This example deletes all of the static addresses added to the ports of the
VLAN with the VID 18:
awplus> enable
awplus# clear mac address-table static vlan 18