Allied Telesis AT-9000 Series - Chapter 20: MAC Address Table Commands; Table 34. MAC Address Table Commands

397
Chapter 20
MAC Address Table Commands
The MAC address table commands are summarized in Table 34.
Table 34. MAC Address Table Commands
Command Mode Description
“CLEAR MAC ADDRESS-TABLE” on
page 398
Privileged Exec Deletes MAC addresses from the
MAC address table.
“MAC ADDRESS-TABLE AGEING-
TIME” on page 400
Global
Configuration
Sets the aging timer, which is used by
the switch to identify inactive dynamic
MAC addresses for deletion from the
table.
“MAC ADDRESS-TABLE STATIC” on
page 402
Global
Configuration
Adds static unicast MAC addresses to
the table.
“NO MAC ADDRESS-TABLE STATIC”
on page 404
Global
Configuration
Deletes static unicast MAC addresses
from the table.
“SHOW MAC ADDRESS-TABLE” on
page 406
Privileged Exec Displays the MAC address table and
the aging timer.