Allied Telesis AT-9000 Series - No Ip Igmp Snooping Mrouter

AT-9000 Switch Command Line User’s Guide
487
NO IP IGMP SNOOPING MROUTER
Syntax
no ip igmp snooping mrouter interface port
Parameter
port
Specifies a multicast router port.
Mode
Global Configuration mode
Description
Use this command to remove static multicast router ports. Removing all
multicast router ports activates auto-detect.
Confirmation Command
“SHOW IP IGMP SNOOPING” on page 488
Examples
This example removes port 3 as multicast router ports:
awplus> enable
awplus# configure terminal
awplus(config)# no ip igmp snooping mrouter interface
port1.0.3