AT-9000 Switch Command Line User’s Guide
509
DELETE
Syntax
delete
filename
.cfg
Parameter
filename.cfg
Specifies the name of the boot configuration file to be deleted. You
can use the wildcard “*” to replace any part of a filename to delete
multiple configuration files.
Mode
Privileged Exec mode
Description
Use this command to delete boot configuration files from the file system in
the switch. This command is equivalent to “DELETE FORCE” on
page 510.
If you delete the active configuration file, the switch recreates it the
next time you issue the WRITE command or the COPY RUNNING-
CONFIG STARTUP-CONFIG command. To view the name of the
active boot configuration file on the switch, refer to “SHOW BOOT”
on page 528.
To view a list of the files in the file system, refer to “DIR” on page 511.
Examples
This command deletes the boot configuration file “unit12.cfg”:
awplus# delete unit12.cfg
This command deletes all boot configuration files that start with “bldg”:
awplus# delete bldg*.cfg
To Next Page
Loading...
