Allied Telesis AT-9000 Series - Show Lacp Sys-ID; Figure 114: SHOW LACP SYS-ID Command

Chapter 41: LACP Commands
630
SHOW LACP SYS-ID
Syntax
show lacp sys-id
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the LACP priority value and MAC address of
the switch. Figure 114 provides an example of the display.
Figure 114. SHOW LACP SYS-ID Command
Note
The LACP priority value is set as an integer with “LACP SYSTEM-
PRIORITY” on page 622 and displayed in hexadecimal format by
this command.
Example
This example displays the LACP priority value and MAC address:
awplus# show lacp sys-id
System Priority: 0x0080 (32768)
Mac Address: EC-CD-6D-1E-52-28