Allied Telesis AT-9000 Series User Manual

Chapter 54: MAC Address-based VLAN Commands
866
SHOW VLAN MACADDRESS
Syntax
show vlan macaddress
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the MAC addresses and the egress ports of
the MAC address-based VLANs on the switch. An example is shown in
Figure 148.
Figure 148. SHOW VLAN MACADDRESS Command
VLAN 11 MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address Ports
-------------------------------------------------
5A:9E:84:31:23:85 port1.0.4-port1.0.8
1A:87:9B:52:36:D5 port1.0.4
26:72:9A:CB:1A:E4 port1.0.4
89:01:BC:64:95:12 port1.0.4
B2:89:10:02:1C:AE port1.0.4
-------------------------------------------------
VLAN 12 MAC Associations:
Total number of associated MAC addresses: 5
-------------------------------------------------
MAC Address Ports
-------------------------------------------------
78:3e:56:C8:AE:19 port1.0.15-port1.0.22
AE:4B:76:18:54:C4 port1.0.15
E7:98:03:12:C4:C5 port1.0.15
7B:89:B2:AB:C4:57 port1.0.15
89:EB:7B:34:82:CE port1.0.15
-------------------------------------------------

Allied Telesis AT-9000 Series Specifications

General

Brand	Allied Telesis
Model	AT-9000 Series
Category	Switch
Language	English