Allied Telesis AT-9000 Series - Chapter 59: VLAN Stacking Commands; Table 83. VLAN Stacking Commands

905
Chapter 59
VLAN Stacking Commands
The VLAN stacking commands are summarized in Table 83.
Table 83. VLAN Stacking Commands
Command Mode Description
“NO SWITCHPORT VLAN-
STACKING” on page 906
Port Interface Removes ports from VLAN stacking.
“PLATFORM VLAN-STACKING-TPID”
on page 907
Global
Configuration
Specifies the Tag Protocol Identifier
(TPID) value.
“SHOW VLAN VLAN-STACKING” on
page 908
Privileged Exec Displays the port assignments of
VLAN stacking
“SWITCHPORT VLAN-STACKING”
on page 909
Port Interface Enables VLAN stacking on a port and
designates it as a customer-edge-port
or provider-port.