AT-FS750/24-41 Web User Interface Manual
5-2
The hardware version of this device.
The firmware verision of the device.
The name of the device. Default is SysName.
The dentification information of a contact person. Deafult is SysContact.
Entering the device location description. Maximum of 50 characters is allowed
and a null string is not accepted. Default is SysLocation.
The time duration since the system has been up and running.
The MAC address of the device.
Web Aut0 Timeout
(180-3600 secs)
The duration that the device times out when no user activity occurs on the
web interface. Default is 600 seconds.
CLI Auto Timeout
(1-18000 secs)
The duration that the device times out when no user activity occurs on the
web interface. Default is 1800 seconds.
Click Apply to submit the changes.
User Account
This page is to create and display user account information.
Figure 10 – System > User Account
Privilege level that ranges from 1 to 15. 15 are the highest level.
Click ADD to submit the changes and the Reset button will clear the information inputed. Select and click
Delete to remove an existed account. The default accounts are root (priviledge 15) and guest (priviledge 1).
Management VLAN
This page is to edit the management VLAN information.