Allied Telesis AT-FS750 - SNMP Community Settings; SNMP Host Table

AT-FS750/24-41 Web User Interface Manual
5-6
Figure 16 – System > SNMP > View Table
Parameter
Description
View Name
SNMP view name
Subtree OID
The object ID of MIB tree
OID Mask
The mask of OID
View Type
included – Includes the object in the list that the SNMP administrator can
access.
excluded – Excludes the object from the list that the SNMP administrator can
access.
Click ADD to submit the changes and the Reset button will clear the information inputed. Select and click
Delete to remove an existed entry.
SNMP Community Settings
This page is to create and edit a SNMP community information.
Figure 17 – System > SNMP > Community Table
Parameter
Description
Community Name
SNMP community name
User Name (View
Policy)
ReadOnly – The community has readonly priviledge.
ReadWrite - The community has readwrite priviledge.
Click ADD to submit the changes and the Reset button will clear the information inputed. Select and click
Delete to remove an existed entry.
SNMP Host Table
This page is to create a host that can access the device by SNMP protocol.