Allied Telesis AT-FS750 - RSTP Configuration

AT-FS750/24-41 Web User Interface Manual
6-12
Port State
Specify the current state of this port.
Priority
Specify the spannping tree port priority. Possible value is 0-240. Default is
128.
Cost
Specify the path cost of the port. Possible value is 0-200000000. Default
200000000
MSTP CIST Port Status
To display the current MSTP CIST port status.
Figure 43 – Layer2 Management > MSTP > CIST Port Status
Click 1-12, 13-24, 25-28 to display the statistics for corresponding ports.
RSTP
RSTP Global Configuration
This page is to configure the RSTP global settings.
Figure 44 – Layer2 Management > RSTP > Global Stettings
Parameter
Description
System Control
To activate or shutdown the RSTP function. Select Start to activate the MSTP
function, Shutdown to shutdown MSTP function.
Status
To enable or disable the MSTP. Select Enabled to enable the MSTP function,
Disabled to disable it. Default is disabled.
Dynamic Path Cost
Calculation
Select the path cost calculation mode of spanning tree. Select True to enable
dynamic pathcost according to the port speed, False to disable it. Default if
False.
Click Apply to submit the changes.