AT-FS750/24-41 Web User Interface Manual
6-16
Figure 49 – Layer2 Management > LA > Interface Settings
Specify the ID of port channel that will apply the changes.
To activate or shutdown a port channel interface. Select Up to activate it,
Down to shutdown it. Default is UP
Specify the the Maximum Transmission Unit (MTU) frame size of the
interface.
Click Add to submit the changes, Reset to clear the value just inputed.
LA Port Channel Settings
This page is to configure the details of a port channel.
Figure 50 – Layer2 Management > LA > Port Channel Settings
Select a configured port channel group to submit the changes.
To add or delete ports from/to a port channel. Select Add add ports, Delete to
delete one.
Specify the mode of this port channel. Possible options are Lacp and Manual.
Default is Lacp
Specify which port to be included in this port channel.
Specify the MAC address of the port channel. Select Dynamic to let system
assign the MAC address to the port channel automatically, or select Manual
to use a manual configured MAC address.
Specify the manual configured MAC address of this port channel.
Click Apply to submit the configurations, Reset to clear the value just inputed.
To Next Page
Loading...
