Allied Telesis AT-FS750 - RADIUS Server Configuration

AT-FS750/24-41 Web User Interface Manual
6-21
Figure 57 – Layer2 Management > 802.1X > Local AS
Parameter
Description
User Name
Specify the user name of the new user entry.
Password
Specify the password of the new user entry.
Permission
Specify if the new user is allowed to access the network.
Auth-TimeOut
Specify the authentication timeout for the new user.
Port List
Specify which port that the new user is allowed to access.
Click Add to add a new user entry, Reset to clear the value just inputed.
Parameter
Description
Select
Select an existing user entry to apply new settings.
User Name
The user ID.
Permission
Specify if the user is allowed to access the network.
Auth-TimeOut
Specify the authentication timeout for the user.
Port List
Specify which port that the user is allowed to access.
Click Apply to submit the changes to existing user account, Delete to delete one.
RADIUS Server Configuration
This page is to configure the details of RADIUS server.
Figure 58 – Layer2 Management > 802.1X > Radius Settings
Parameter
Description