Allied Telesis AT-FS750 - 802.1 p Queue Mapping; 802.1 p Port Priority; DSCP Queue Mapping

AT-FS750/24-41 Web User Interface Manual
8-3
802.1p Port Priority
This page is to configure the 802.1p priority for untagged packets receive from each port.
Figure 75 – QoS > Port Priority
Parameter
Description
Select
Select a port to submit the configuration changes.
Port
Port ID.
User Priority
Specify 802.1p priority of untagged packets.
Click Apply to submit the changes.
Click 1-12, 13-24, 25-28 to configure port priority for corresponding ports.
DSCP Queue Mapping
This page is to enable/configure the DSCP and queue mapping.
Figure 76 – QoS > DSCP
Parameter
Description