Allied Telesis AT-FS750 - Egress Queue Scheduling

AT-FS750/24-41 Web User Interface Manual
8-4
DSCP Mapping
To enable the DSCP queue mapping. When disabled, Switch will map queue
with 802.1p priority.
Click Apply to submit the changes.
Parameter
Description
Type00~63
Specify which switch queue to map. The options are Class-0, Class-1,
Class-2 and Class-3.
Click Type0-15, 16-31, 32-47, 48-63 to configure queue mapping for corresponding DSCP levels.
Click Apply to submit the changes.
Egress Queue Scheduling Settings
This page is to configure the scheduling algorithm for switch queues.
Figure 77 – QoS > Egress Algorithm
Parameter
Description
Scheduling Algorithm
Select the algorithm of queue scheduling. The options are:
Strict Priority - The traffic in highest queue always process first.
Weighted RoundRobin - Using weighted round-robin algorithm to handle
packets in priority queues.
Defualt is Strict Priority.
Click Apply to submit the changes.