Allied Telesis AT-FS750 - RMON Alarms Configuration

AT-FS750/24-41 Web User Interface Manual
9-7
Port
The port of the RMON history collection.
Buckets Requested
Specify the maximum number of RMON history collection.
Buckets Granted
The number of bucket granted for collecting the RMON history.
Interval
Specify the time interval for the history collection.
Owner
Specify the owner of the history entry.
Status
Specify the status of this history entry. The options are:
Valid - The history entry is valid.
Under Creation -
Invalid - The history entry is invalid and will be deleted.
Click Apply to submit the changes.
RMON Alarms Configuration
To set a RMON alarm to a MIB object.
Figure 81 – RMON > Alarms
Parameter
Description
Index (1~65535)
Specify the index of the RMON alarm.
Interval (1~2^31-1
secs)
The time interval in seconds that alarm monitors the MIB variable.
Variable
The MIB OID to set alarm.
Sample type
The type of the alarm sampling. The options are:
Absolute value - To test the MIB variable directly.
Delta value - To test the change between samples of a MIB variable.
Rising Threshold
(0~2^31-1)
The threshold value to trigger alarm when the number of sample exceeds.
Falling Threshold
(0~2^31-1)
The threshold value to reset alarm when the number of sample exceeds.
Rising Event Index
(1~65535)
The number of event to trigger when rising threshold is exceeded.
Falling Event Index
(1~65535)
The number of event to trigger when falling threshold is exceeded.
Owner
Specify the owner of the alarm entry.
Click Add to create a new RMON alarm, Reset to clear the value just inputed.