Allied Telesis AT-GS900M Series - Add Snmp Community

AT-GS900M Series CLI Reference
Section II: Switch Management 113
ADD SNMP COMMUNITY
Syntax
add snmp community= community [traphost= ip_address ]
[manager=
ip_address ] [trap= trap ]
Parameters
community
Specifies an existing community name.
traphost
Specifies the IP address of a host where SNMP traps are sent.
manager
Specifies the IP address of an SNMP management server.
ip_address
Specifies an IPv4 address.
trap
Specifies a trap type or multiple trap types. To specify multiple trap
types, use a comma (,). To send no traps, use the none keyword;
to set all trap types, use the all keyword.
– coldstart
– warmstart
– authentication
– link
– fan
– temperature
– voltage
– login
– newroot
– topologychange
– poe
– loopdetection
– stormdetection