Allied Telesis AT-GS900M Series - Show Switch Mirror

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 271
SHOW SWITCH MIRROR
Syntax
show switch mirror
Parameters
None
Description
Use this command to display the settings of mirroring. An example of the
command output is shown in Figure 38.
Figure 38. SHOW SWITCH MIRROR Command
Example
The following example displays the settings of mirroring:
Manager > show switch mirror
Port Mirroring Information
--------------------------------------------------
Mirror Port ............... 1
Status .................... Disabled
Port Mirroring on Rx ...... None
Port Mirroring on Tx ...... None
Port Mirroring on Both .... None
--------------------------------------------------