Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 279
Chapter 15
Ethernet Protected Switched Ring
(EPSR) Commands
The EPSR commands are summarized in Table 32.
Table 32. EPSR Commands
Command Description
“ADD EPSR DATAVLAN” on
page 280
Adds a data VLAN to the EPSR domain.
“CREATE EPSR” on page 281 Create an EPSR domain.
“DELETE EPSR DATAVLAN” on
page 283
Removes a data VLAN from the EPSR domain.
“DESTROY EPSR” on page 284 Deletes an EPSR domain.
“DISABLE EPSR” on page 285 Disables an EPSR domain.
“ENABLE EPSR” on page 286 Enables an EPSR domain.
“PURGE EPSR” on page 287 Initializes EPSR and deletes all EPSR domains
on the switch.
“SHOW EPSR” on page 288 Displays information about EPSR domains on the
switch.
“SHOW EPSR COUNTER” on
page 289
Displays statistics counters for the EPSR domain.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English