AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 283
DELETE EPSR DATAVLAN
Syntax
delete epsr=
epsr_name
datavlan=[
vlan_name
|
vlan_id
|all]
Parameters
epsr_name
Specifies an Ethernet Protected Switched Ring (EPSR) domain.
datavlan
Specifies a data VLAN with a VLAN name or VLAN ID. With the
keyword all, all data VLANs are specified.
Description
Use this command to remove a data VLAN from the specified EPSR
domain.
Confirmation Command
“SHOW EPSR” on page 288
Example
The following command deletes VLAN 50 from the EPSR domain “epsr1:”
Manager > delete epsr=epsr1 datavlan=50