Allied Telesis AT-GS900M Series User Manual

Chapter 17: DHCP Snooping Commands
328 Section III: Layer 2 Switching
SHOW DHCPSNOOPING
Syntax
show dhcpsnooping
Parameters
None
Description
Use this command to display information about DHCP Snooping. An
example of the command output is shown in Figure 47.
Figure 47. SHOW DHCPSNOOPING Command
Example
The following example displays information for DHCP Snooping:
Manager > show dhcpsnooping
DHCP Snooping Information
--------------------------------------------------------
DHCP Snooping .............. Enabled
Option 82 status ......... Enabled
ARP security ............. Enabled
Logging enabled .......... None
DHCP Snooping Database:
Full Leases/Max Leases ... 2/260
Check Interval ........... 60 seconds
Check Options ............ None
--------------------------------------------------------

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English