Allied Telesis AT-GS900M Series User Manual

Chapter 19: Power Saving Commands
358 Section III: Layer 2 Switching
Description
Use this command to modify a power saving trigger. See“CREATE
TRIGGER” on page 346 for the guidelines for power saving triggers.
Confirmation Command
“SHOW TRIGGER” on page 360
Example
The following command changes trigger ID 1 to set the switch in the sleep
mode starting at 24:00 and ending at 7:00:
Manager > set trigger=1 psmode=sleep startime=24:00
endtime=7:00

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English