Allied Telesis AT-GS900M Series User Manual

Chapter 20: Rapid Spanning Tree Protocol (RSTP) Commands
362 Section III: Layer 2 Switching
DISABLE STP
Syntax
disable stp [port= port_list |all]
Parameters
port_list
Specifies one or more ports. To specify multiple ports, use
commas to separate nonconsecutive numbers (for example 5,7,9)
or a dash to specify consecutive numbers (for example (1-4).
Description
This command is used to disable the Rapid Spanning Tree Protocol
(RSTP) on selected ports or the switch. By default, RSTP is disabled. To
view the current status of RSTP, use “SHOW STP” on page 371.
Examples
The following command disables RSTP on ports 5 and 6:
disable stp port=5-6
The following command disables RSTP on the switch:
disable stp

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English