Allied Telesis AT-GS900M Series User Manual

AT-GS900M Series CLI Reference
Section IV: Security and Traffic Control 405
Chapter 22
Access Filter Commands
The access filter commands are summarized in Table 46.
Table 46. Access Filter Commands
Command Description
“ADD ACCESS FILTER” on
page 406
Adds an access filter entry to the
specified access filter group.
“DELETE ACCESS FILTER
ENTRY” on page 408
Deletes an access filter entry from the
access filter group.
“DISABLE ACCESS FILTER” on
page 410
Disables the access filter function on the
specified access filter group.
“ENABLE ACCESS FILTER” on
page 411
Enables the access filter function on the
specified access filter group.
“SET ACCESS FILTER” on
page 412
Specifies the default action on the
specified access filter group.
“SET ACCESS FILTER ENTRY”
on page 413
Changes the settings of the specified
access filter entry.
“SHOW ACCESS FILTER” on
page 415
Displays the default action and status of
the access filter groups or the settings of
the specified access filter group.

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English