Allied Telesis AT-GS900M Series User Manual

Chapter 26: Policy-Based QoS Commands
472 Section IV: Security and Traffic Control
DELETE QOS POLICY
Syntax
delete qos policy= policy_number
[trafficclasslist=
traffic_class_list |none]
Parameters
policy_number
Specifies a policy number.
trafficclasslist
Specifies a list of traffic classes. To specify multiple classifiers, use
a comma (,) to separate them. To specify a range of classifiers,
use a hyphen (-). The default setting is none.
Description
Use this command to remove a traffic class from the QoS policy.
Confirmation Command
“SHOW QOS POLICY” on page 494
Example
The following command deletes traffic classes 1 to 3 from QoS policy 1:
Manager > delete qos policy=1 trafficclasslist=1-3

Allied Telesis AT-GS900M Series Specifications

General

Brand	Allied Telesis
Model	AT-GS900M Series
Category	Switch
Language	English