Allied Telesis AT-GS900M Series - Destroy Qos Flowgroup

AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 475
DESTROY QOS FLOWGROUP
Syntax
destroy qos flowgroup= flow_group_list |all
Parameters
flow_GROUP_list
Specifies a list of flow groups. To specify multiple flow groups, use
a comma (,) to separate them. To specify a range of flow groups,
use a hyphen (-).
all
Specifies all flow groups.
Description
Use this command to delete flow groups.
Confirmation Command
“SHOW QOS FLOWGROUP” on page 493
Example
The following command deletes flow group 1:
Manager > destroy qos flowgroup=1