Allied Telesis AT-GS900M Series - Page 490

Chapter 26: Policy-Based QoS Commands
490 Section IV: Security and Traffic Control
Specifies a MAC address or mask in the format: ff-ff-ff-ff-ff-ff.
any
Specifies any.
ethformat
Specifies the frame format.
ethii-untagged
Specifies the frame format to Ethernet version 2 and untagged.
ethii-tagged
Specifies the frame format to Ethernet version 2 and tagged.
802.2-untagged
Specifies the frame format to 802.2 LLC and untagged.
802.2-tagged
Specifies the frame format to 802.2 LLC and tagged.
priority
Specifies a priority. The range is 0 to 7. The default setting is none.
vlan_name
Specifies a VLAN name.
vid
Specifies a VLAN ID. The range is 1 to 4094.
protocol
Specifies the value of the protocol field in the packet with the
protocol number. For the IP, ARP, or RARP protocol, you can
specify it with the protocol name. The default setting is any.
iptos
Specifies the value of the precedence in the ToS octet in the
packet. The range is 0 to 7. The default setting is any.
ipdscp
Specifies the value of the IP DSCP field. The range is 0 to 63. The
default setting is any.
ipprotocol
Specifies the value of the IP protocol field in the packet with the
protocol number. For the TCP, UDP, ICMP, and IGMP protocol,
you can specify it with the protocol name. The default setting is
any.
ipsaddr
Specifies the IP source address. You can also specify the Variable
Length Subnet Mask (VLSM). The default value is any.