Chapter 4: Basic Operations
64 Section I: Getting Started
File System Overview
The switch has a file system built in the flash memory. You can access
files on the file system using CLI commands.
File Types The file types that you can store on the file system on the switch are listed
in Table 6:
File Name Here are the requirement for a file name:
The file name must be up to 16 alphanumeric characters without a
period and file extension.
The file name is case-sensitive.
The file name can include hyphen, underscore, period, and
parentheses.
Table 6. File Type and File Extension
File Type Extension
Configuration file .cfg
Script file such as batch and trigger .scp
Management software image file .rel
To Next Page
Loading...
