Chapter 4: Basic Operations
70 Section I: Getting Started
2. Start a local or remote management session on the switch.
3. Check for the space on the system by using the SHOW FILE
command.
If the switch has two management software image files, delete one or
both files. In addition, make free space by deleting other files if
necessary.
The switch can store only two management software image files.
4. Download the management software image file from FTP server by
using LOAD command. See “LOAD” on page 80.
Do not turn off the switch during the downloading and writing
process. When powered off during the process, the switch may not
restart.
5. Restart the switch using the RESTART command.
To Next Page
Loading...
