Chapter 13: VLAN Commands
210 Section III: Layer 2 Switching
ADD VLAN PORT
Syntax
add vlan=
vlan_name
|
vid
port=
port_list
|all
[frame=tagged|untagged] [group=uplink|auto|
group_number
]
Parameters
vlan
Specifies a VLAN with either the VLAN name or VLAN ID.
vlan_name
Specifies a VLAN name.
vid
Specifies a VLAN ID. The range is 2 to 4094.
port_list
Specifies a list of ports to assign the VLAN to. To specify multiple
ports, use a comma (,) to separate them. To specify a range of
ports, use a hyphen (-).
all
Specifies all the switch ports.
frame
Assigns the port as tagged or untagged. The default setting is
untagged.
tagged
Assigns the VLAN to the specified ports as tagged.
untagged
Assigns the VLAN to the specified ports as untagged. A port can
belong to only one VLAN as a untagged port.
group
Specifies that the ports are for uplink or for clients.
uplink
Specifies the ports to uplink.
auto
A group is assigned automatically to each port.
group_number
Specifies a group number. The range is 1 to 65535.
To Next Page
Loading...
