Allied Telesis AT-GS908M - Show Epsr Counter

AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 289
SHOW EPSR COUNTER
Syntax
show epsr[= epsr_name |all] counter
Parameters
epsr_name
Specifies an EPSR domain.
all
Specifies all ESPR domains.
Description
Use this command to display statistics counters for the EPSR domain. An
example of the command output is shown in Figure 44.
Figure 44. SHOW EPSR COUNTER Command
Example
The following example displays statistics counters for the the EPSR
domains:
Manager > show epsr=all counter
EPSR Counters
------------------------------------------------------------------------
Name: domain_two
Receive: Transmit:
Total EPSR Packets 4674 Total EPSR Packets 2
Health 4671 Health 0
Ring Up 2 Ring Up 2
Ring Down 0 Ring Down 0
Link Down 1 Link Down 0
Invalid EPSR Packets 0
Name: domain_one
Receive: Transmit:
Total EPSR Packets 1609 Total EPSR Packets 3
Health 1603 Health 0
Ring Up 3 Ring Up 0
Ring Down 3 Ring Down 0
Link Down 0 Link Down 3
Invalid EPSR Packets 0
------------------------------------------------------------------------