AT-GS900M Series CLI Reference
Section III: Layer 2 Switching 379
ADD MSTP MSTI VLAN
Syntax
add mstp msti=
instance
vlan=
vlan_list
|all
Parameters
instance
Specifies MST instance ID. The range is 1 to 15.
vlan_list
Specifies a list of VLANs. To specify multiple VLANs, use a comma
(,) to separate them. To specify a range of VLANs, use a hyphen
(-).
Description
Use this command to associate VLANS to MST instances. By default, all
VLANs are associated to Common and Internal Spanning Tree (CIST).
When associated to a MST instance, the VLAN is not associated to CIST
any more. A VLAN can be associated to only one MST instance. To
change a MST instance for a VLAN, you must delete a MST instance from
a VLAN using the DELETE MSTP MSTI VLAN command before using the
ADD MSTP MSTI VLAN command.
Confirmation Command
“SHOW MSTP” on page 399
Examples
The following command associates VLAN 10 to MST instance 1:
add mstp msti=1 vlan=10
To Next Page
Loading...
