AT-GS900M Series Command Reference
Section IV: Security and Traffic Control 463
CREATE QOS FLOWGROUP
Syntax
create qos flowgroup=
flow_group_number
[description=
string
]
[markvalue=
mark_value
|none] [priority=
priority
|none]
[remarkpriority=yes|no|on|off|true|false]
[tos=
tos_value
|none]
[movetostoppriority=yes|no|on|off|true|false]
[moveprioritytotos=yes|no|on|off|true|false]
[classifierlist=
classifier_list
|none]
Parameters
flow_group_number
Specifies a flow group number. The range is 0 to 1023.
string
Specifies the description of the flow group. The description is up to
31 alphanumeric characters. To include a space, place a double
quote (“) before and after the space.
mark_value
Specifies a value to be written in the DSCP field of the IP header.
The range is 0 to 63. This value has a priority over the markvalue
of the traffic class and the indscpoverwrite of the policy. The default
setting is none.
priority
Specifies a priority. The range is 0 to 7. The default setting is none.
remarkpriority
Specifies yes, no, or none to the state that the priority of the flow
group overwrites the user priority in the packet. The default setting
is none.
yes, on, true
Specifies yes to the parameter state.
no, off, false
Specifies no to the parameter state.
tos_value
Specifies a value for the ToS field of the IP header.
movetostoppriority
Specifies yes, no, or none to the state that the ToS value of the IP
header is used to determine the priority. The default setting is
none.
To Next Page
Loading...
