Chapter 2: Installation
42
Starting a Management Session
To start a management session on an AT-GS950/48 Gigabit Ethernet
Smart switch, perform the following procedure:
1. In a web browser address box, enter the following IP address:
192.168.1.1
The main page for the AT-S87 management software main page is
shown in Figure 15.
Figure 15. AT-S87 Management Software Main Page
2. Click OK.
Because the switch initially has no login or password protection, follow
the instructions in the AT-S87 Management Software User’s Guide to
change the IP address and add administrative users.
To Next Page
Loading...
