Figure 81. Switch Initialization Messages (Continued)
Starting base/modules... [ OK ]
Received event modules.done
Starting base/reboot-stability... [ OK ]
Checking system reboot stability... [ OK ]
Starting base/apteryx... [ OK ]
Starting base/crond... [ OK ]
Starting base/appmond... [ OK ]
Starting base/clockcheck... [ OK ]
Starting hardware/timeout... [ OK ]
Starting base/inet... [ OK ]
Received event apteryx.done
Starting base/alfred... [ OK ]
Starting base/kernond... [ OK ]
Starting base/plugman... [ OK ]
Starting hardware/openhpi... [ OK ]
Received event apteryx-sync.done
Received event board.inserted
Starting hardware/hardware-done... [ OK ]
Received event hardware.done
Starting network/startup... [ OK ]
Starting base/external-media... [ OK ]
Received event hostcfg.done
Starting network/licd... [ OK ]
Starting network/stackd... [ OK ]
Starting network/election.timeout... [ OK ]
17:45:46 awplus-1 VCS[908]: The Stacking Ports are currently not installed.
Please install and reboot.
Received event network.enabled
Initializing HA processes:
atmfd_agentd, atmfd, hostd, hsl, mstp, nsm, ripngd
rmon, sflowd, auth, bgpd, cntrd, epsr, imi
imiproxyd, irdpd, lacp, lldpd, loopprot, ospf6d, ospfd
pdmd, pim6d, pimd, ripd, udldd, vrrpd
Received event network.initialized
Received event vcs.elected-master
To Next Page
Loading...
