C613-50105-01 REV C Command Reference for x210 Series 100
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG
show running-config
Overview This command displays the current configuration of your device. Its output
includes all non-default configuration. The default settings are not displayed.
You can control the output in the following ways:
• To display only lines that contain a particular word, enter the following
parameters after the command:
| include <word>
• To start the display at the first line that contains a particular word, enter the
following parameters after the command:
| begin <word>
• To save the output to a file, enter the following parameters after the
command:
> <filename>
Syntax show running-config
Mode Privileged Exec and Global Configuration
Example To display the current configuration of your device, use the command:
awplus# show running-config [<feature>|full]
Parameter Description
<feature> Display only the configuration for a single feature. The features
available depend on your device and will be some of the following list:
access-list ACL configuration
antivirus Antivirus configuration
application Application configuration
as-path Autonomous system path filter
configuration
as-path access-list Configuration of ACLs for AS path filtering
atmf Allied Telesis Management Framework
configuration
bgp Border Gateway Protocol (BGP)
configuration
community-list Community-list configuration
crypto Security-specific configuration
dhcp DHCP configuration
dpi Deep Packet Inspection configuration
To Next Page
Loading...
