Allied Telesis AT-x210-9GT - Chapter 30: Public Key Infrastructure Commands; Introduction; Public Key Infrastructure Commands

30
C613-50105-01 REV C Command Reference for x210 Series 1006
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Public Key
Infrastructure
Commands
Introduction
Overview This chapter provides an alphabetical reference of commands used to configure
the Public Key Infrastructure (PKI) capabilities on an AlliedWare Plus device.
Command List •“crypto key generate rsa” on page 1007
•“crypto key zeroize” on page 1008
•“crypto pki authenticate” on page 1009
•“crypto pki enroll” on page 1010
•“crypto pki enroll user” on page 1011
•“crypto pki export pem” on page 1013
•“crypto pki export pkcs12” on page 1014
•“crypto pki import pem” on page 1016
•“crypto pki import pkcs12” on page 1018
•“crypto pki trustpoint” on page 1019
•“enrollment (trustpoint configuration mode)” on page 1020
•“fingerprint (trustpoint configuration mode)” on page 1021
•“no crypto pki certificate” on page 1023
•“rsakeypair (trustpoint configuration mode)” on page 1024
•“show crypto key mypubkey rsa” on page 1025
•“show crypto pki certificates” on page 1026
•“show crypto pki enrollment user” on page 1028
•“show crypto pki trustpoint” on page 1029
•“subject-name (trustpoint configuration)” on page 1030