Allied Telesis AT-x210-9GT - Chapter 31: TACACS+ Commands; Introduction; TACACS+ Commands

31
C613-50105-01 REV C Command Reference for x210 Series 1032
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TACACS+
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
the device to use TACACS+ servers. For more information about TACACS+, see the
TACACS+ Feature Overview and Configuration Guide.
Command List •“show tacacs+” on page 1033
•“tacacs-server host” on page 1034
•“tacacs-server key” on page 1036
•“tacacs-server timeout” on page 1037