Allied Telesis AT-x210-9GT - Page 104

C613-50105-01 REV C Command Reference for x210 Series 104
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
FILE AND CONFIGURATION MANAGEMENT COMMANDS
SHOW
RUNNING-CONFIG INTERFACE
To display the current running configuration of a device for VLAN 1, use the
command:
awplus# show running-config interface vlan1
To display the current running configuration of a device for VLANs 1 and 3-5, use
the command:
awplus# show running-config interface vlan1,vlan3-vlan5
Output Figure 2-8: Example output from a show running-config interface port1.0.2
command
Related
Commands
copy running-config
show running-config
awplus#show running-config interface port1.0.2
!
interface port1.0.2
switchport
switchport mode access
!