33
C613-50105-01 REV C Command Reference for x210 Series 1081
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
Ethernet Protection
Switched Ring
(EPSRing™)
Commands
Introduction
Overview This chapter provides an alphabetical reference for commands used to configure
Ethernet Protection Switched Ring (EPSRing™). For more information, see the EPSR
Feature Overview and Configuration Guide.
For information on filtering and saving command output, see the “Getting Started
with AlliedWare Plus” Feature Overview and Configuration Guide.
Command List •“debug epsr” on page 1083
•“epsr” on page 1084
•“epsr configuration” on page 1085
•“epsr datavlan” on page 1086
•“epsr enhancedrecovery enable” on page 1087
•“epsr mode master controlvlan primary port” on page 1088
•“epsr mode transit controlvlan” on page 1089
•“epsr priority” on page 1090
•“epsr state” on page 1091
•“epsr trap” on page 1092
•“show debugging epsr” on page 1093
•“show epsr” on page 1094
•“show epsr common segments” on page 1098
•“show epsr config-check” on page 1099
•“show epsr <epsr-instance>” on page 1100
•“show epsr <epsr-instance> counters” on page 1101
•“show epsr counters” on page 1102
•“show epsr summary” on page 1103