Allied Telesis AT-x210-9GT - Atmf Backup Delete

C613-50105-01 REV C Command Reference for x210 Series 1123
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
BACKUP DELETE
atmf backup delete
Overview This command removes the backup file from the external media of a specified AMF
node.
Note that this command can only be run from an AMF master node.
Syntax
atmf backup delete <node-name>
Mode Privileged Exec
Example To delete the backup file from node2, use the following command:
Node_1# atmf backup delete node2
Related
Commands
show atmf backup
atmf backup now
atmf backup stop
Parameter Description
<node-name> The AMF node name of the backup file to be deleted.