C613-50105-01 REV C Command Reference for x210 Series 1131
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
ATMF
BACKUP REDUNDANCY ENABLE
atmf backup redundancy enable
Overview This command is used to enable or disable AMF backup redundancy.
Syntax
atmf backup redundancy enable
no atmf backup redundancy enable
Default Disabled
Mode Global Configuration
Usage If the AMF Master or Controller supports any removable media (SD card/USB), it
uses the removable media as the redundant backup for the AMF data backup.
This feature is valid only if remote file servers are configured on the AMF Master or
Controller.
Example To enable AMF backup redundancy, use the commands:
awplus# configure terminal
awplus(config)# atmf backup redundancy enable
To disable AMF backup redundancy, use the commands:
awplus# configure terminal
awplus(config)# no atmf backup redundancy enable
Related
Commands
atmf backup synchronize
show atmf backup
show atmf backup area
To Next Page
Loading...
