C613-50105-01 REV C Command Reference for x210 Series 1236
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF LINKS GUEST
show atmf links guest
Overview This command displays information about guest nodes visible to an AMF device.
Syntax
show atmf links guest [detail] [interface <IFRANGE>]
Default With no parameters specified this command will display its standard output for all
ports with guest nodes connected.
Mode User Exec/Privileged Exec
Example 1 To display information about AMF guests that are connectable from node1, use
the command:
node1# show atmf links guest
Output Figure 35-13: Example of standard output from show atmf links guest
Example 2 To display detailed information about AMF guests, use the command:
node1# show atmf links guest detail
Parameter Description
detail Displays a full output for the connected guest nodes
<IFRANGE> Select a specific range of ports to display.
node1#sh atmf links guest
Guest Link Information:
DC = Discovery configuration
S = static D = dynamic
Local Guest Model MAC IP / IPv6
Port Class Type DC Address Address
---------------------------------------------------------------
1.0.1 - other D 0013.1a1e.4589 192.168.1.2
1.0.2 aastra-phone other D 0008.5d10.7635 192.168.1.3
1.0.3 cisco-phone2 other S - 192.168.2.1
1.0.4 panasonic... other D 0800.239e.f1fe 192.168.1.5
To Next Page
Loading...
