C613-50105-01 REV C Command Reference for x210 Series 1243
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF NODES
show atmf nodes
Overview This command displays nodes currently configured within the AMF network and
presents a topographical representation of the network infrastructure.
This command displays a summary of all virtual links currently in the running
configuration.
Syntax
show atmf nodes [guest|all]
Mode Privileged Exec
Example 1 To display AMF information for guest nodes only, use the command:
node_1# show atmf nodes guest
To display AMF information for all nodes in the AMF, use the command:
node_1# show atmf nodes all
Parameter Description
guest Display only guest nodes in the AMF network.
all
Display all nodes in the AMF network
Table 37: Sample output from the show atmf nodes guest command
node1#show atmf nodes guest
Guest Information:
Device MAC IP/IPv6
Name Address Parent Port Address
--------------------------------------------------------------------------------
aastra-... 0008.5d10.7635 Node-1 1.0.2 192.168.4.7
poe-1.0.1 0013.1a1e.4589 Node-1 1.0.1 192.168.4.6
ip-camera 0800.239e.f1fe Node-1 1.0.4 192.168.4.8
tq4600 eccd.6df2.da60 Node-1 1.0.5 192.168.4.50
To Next Page
Loading...
